Dricore Plastic Concrete Anchoring Epoxy Paste 2.13 in. D

The Dricore concrete repair system has been specifically designed and engineered to seal, fill and structurally reinforce concrete cracks. This 3-step system includes: step 1 crack prep surface paste, step 2 crack injection expanding foam and step 3 the carbon fiber reinforcement kit. Dricore pro concrete repair high strength anchoring epoxy paste is a two-component, 100% solids, moisture-insensitive, high strength, high modulus, multi-purpose liquid epoxy gel adhesive. It meets the current ASTM C881 and AASHTO M235 types I, ii, iv and v grade 3, classes b and c specifications. It has passed 4 million cycles of simulated seismic tension test. Use Dricore pro concrete repair high strength anchoring epoxy paste as an adhesive for setting/bonding subsurface or external reinforcements to concrete masonry or other substrates. It can also be used for reinforcing steel dowels, threaded rods, bolts and inserts into existing concrete. Use as a multipurpose bond adhesive for structural bonding fresh or hardened concrete to hardened concrete, sealing cracks, setting rhino injection ports prior to injection grouting and as a pick-proof sealant. Surfaces must be clean and profiled or textured. New concrete must be a minimum of 28 days old. All dirt, oil, debris, wax, grease or dust must be removed. Prepare the surface mechanically using a scarifier, sandblast, shot blast, bush hammer or other equipment that will give the surface profile needed for the application. A roughened surface that exposes the aggregate and/or pores of the substrate is imperative for good adhesion. Clean tools and equipment with Mighty Wipes by Dricore, a biodegradable formula, that removes and neutralizes the epoxy. Do not allow epoxy to harden on equipment as cured material can only be removed mechanically.